Murphy RP2308B Manuel d'utilisateur télécharger pdf

RPS-00092B page 1 of 4

MODEL & PART NUMBERS: DC SOLENOIDS & ACCESSORIES SHIPPING WEIGHT

Model No. Description ozs (kg)

RP2307B 12 VDC, 1 in. (25 mm) stroke, 11 lbf (49 N) pull, 23 lbf (102 N) hold 24 ozs (0.7 kg)

RP2308B 24 VDC, 1 in. (25 mm) stroke, 11 lbf (49 N) pull, 23 lbf (102 N) hold 24 ozs (0.7 kg)

RP2309B 12 VDC, 1-1/2 in. (38 mm) stroke, 14 lbf (62 N) pull, 34 lbf (151 N) hold 48 ozs (1.4 kg)

RP2310B 24VDC, 1-1/2 in. (38 mm) stroke, 14 lbf (62 N) pull, 34 lbf (151 N) hold 48 ozs (1.4 kg)

65-01-0108 Clevis yoke assembly 1 ozs (.03 kg)

65-01-0110 Clevis yoke chain assembly 2 ozs (.04 kg)

40-05-0315 Threaded rod (1-1/2 in.) .05 ozs (.001 kg)

00-00-2457 RPS in-line ball joint .05 ozs (.001 kg)

00-00-2458 RPS 90° ball joint 1 ozs (.03 kg)

RP Series

■

One Solenoid For Pull/Push Operation

■

No Internal Switches

■

Reduce Coil Burnout

■

Boost Reliability

■

Reduce Adjustments

■

High Force–Small Size

■

Can Be Used With Most Engines

Start Systems

■

SD85 Solenoid Drive Time Delay

Available To Greatly Reduce Possibility

Of Coil Burnout And Facilitate Low

Current Piloted Operation.

RP2307B & RP2308B

RP2309B & RP2310B

RPS-00092B

Revised 11-03

Catalog Section 40

(00-02-0107)

Pull/Push DC Solenoids for

Diesel Engines

Description

Murphy push/pull DC Solenoids

provide single unit versatility for engine

applications, such as shutdown.

A choice of two models and two

voltages is available. All models come

complete with return spring and rubber

seal boot. See the next page for

specifications and options.

Basic Models

Models RP2307B and RP2308B give a

full one inch (25 mm) stroke at 11

pounds (49 N) and hold up to 23 pounds

(102 N) at full voltage, continuous duty.

They will operate at any stroke less than

maximum; refer to the chart shown on

page 2.

Models RP2309B and RP2310B can

pull 14 pounds (62 N) with a one-and-a-

half inch (38 mm) stroke. They hold up

to 34 pounds (151 N) at full voltage,

continuous duty. See the chart on page 2

for holding force at any stroke less than

maximum.

SD85 Solenoid Drive

Time Delay

Using the SD85 ensures the energize

coil is only powered for 1-2 seconds

with each operation. If the plunger does

not seat in that time, it is highly

unlikely it will seat. The hold coil is

energized as long as the signal to the

SD85 is active. This insures long life of

the RP solenoid.

Warranty

A limited warranty on materials and workmanship

is given with this FW Murphy product. A copy of

the warranty may be viewed or printed by going

to www

.fwmurphy.com/support/warranty.htm

1 2 3 4

Résumé du contenu

Page 1 - Diesel Engines

RPS-00092B page 1 of 4MODEL & PART NUMBERS: DC SOLENOIDS & ACCESSORIES SHIPPING WEIGHTModel No. Description ozs (kg)RP2307B 12 VDC, 1 in. (25

Page 2 - Solenoid Dimensions

1/2 in.(13 mm)1-19/32 in.(40 mm)2-13/16 in. (72 mm)5 in.(127 mm)BootInternal †1/4-281 in.(25 mm)3/32 in.(2 mm)2 in.(51 mm)2-1/2 in.(64 mm)2-7/16 in.(6

Page 3 - Typical Wiring Diagrams

RPS-00092B page 3 of 4Mechanical Installation 1. Bolt the solenoid securely to the mounting bracket. 2. Connect linkage and check for binding. Plunger

Page 4 - UK–ISO 9001:2000 FM 29422

RPS-00092B page 4 of 41-1/4 in.(32 mm)3/8 in.(9 mm)1/4-28 Threads1-1/4 in.(32 mm)3/8 in.(9 mm)2 in. (51 mm)1/4-28 Threads1/4-28 Threads1-1/2 in. (38 m

Commentaires sur ces manuels

Pas de commentaire

Murphy RP2308B Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Non Murphy RP2308B. Murphy RP2308B User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non Murphy RP2308B